Lubricants for the brewing industry

Lubricants for the Brewing Industry

All lubricant products must comply with the requirements of the FDA and NSF as well as the European regulations. We also have WRc approval for use in the water industry as well as the brewing industry.

Lubricants for brewing should be resistant to both hot and cold water and steam. They should be neutral towards beer foam, resistant to disinfectants, and have a wide service temperature range. We also supply to companies who dry the hops, barley and other ingredients so that they have the correct moisture level.

That first sip of the foaming pint tells the consumer everything. If it was contaminated it would be instantly recognisable, and even the humble beer tap itself needs the occasional bit of lubrication!

If you are involved in the brewing or drinks industry, (including water), then we know you can benefit from using some of the following specialist lubricants for the brewing industry. Cheers!

OEM Lubricant 2 which is a grease applicable to rolling and sliding bearings, keg racking machines, fittings in cellars, in dispensers, and in seals.

OEM Lubricant 6 which is a grease ideally suited to the lubrication of beer and bar fittings, filling and feeding fittings with EPDM seals as well as rubber seals. E.g. collars, membranes and lip seals.

OEM Lubricant 7 which is an oil for difficult service conditions or long term application on compressors, gears, hydraulics and chains.

We have many other products and we know we can provide the correct lubricant for your brewing equipment from the large range of OEM approved lubricants.

Kluber, our specialist 2009 lubricant supplier has some of these products in stock now. Call them now on?01422 205115 or Tell Us What You Want™
Ask for Sandy or Nick in the technical department.

We look forward to speaking with you.