Lubricants for Tyre Manufacture

Tyre Manufacture lubricants

Lubricants are used during tyre manufacture in the hot moulding operation which is a critical process. The lubricants used must allow for high temperatures and prevent 'burning in' and corrosion.

During the making of large tyres for trucks and tractor type vehicles, very high temperatures and relatively long moulding periods are encountered, and mould release lubricants in the tyre industry are subjected to extreme conditions.

Many of our lubricant suppliers have developed special environmentally friendly grease, oil and spray lubricants for tyre moulding, and we know you will benefit from using some of the following products

OEM Lubricant 110 which are anti-seize lubricants and separating agents, and are a combination of solids with a synthetic carrier oil that will cope with temperatures up to 1400°C.

OEM Lubricant 17A which is a fully synthetic special grease that is non-toxic, non-combustible, has excellent corrosion protection and optimum oxidation stability, and is used as a release agent in the moulding of car tyres.

OEM Lubricant 23 which can be used for manual or automatic spray application to lubricate such items as mould opening threads and chain studs at temperatures up to 250°C.

We have many other products, and we know we can provide you with the correct lubricant for your tyre moulding machinery from the large range.

Kluber, our specialist 2009 lubricant supplier has these products in stock now. Call them now on 01422 205115 or Tell Us What You Want™
Ask for Sandy or Nick in the technical department.

We look forward to speaking with you.

Related web sites for tyres which may be of interest
	www.kumhotech.co.uk Kumho European Technical Centre is the European tyre development facility for the Korean tyre manufacturer Kumho. KETC is actively developing car, 4x4, van and heavy truck tyres for the European market.