Lubricants for Taps, Water Valves and Fittings
The type of lubricant used on taps, water valves and fittings needs to be carefully selected and approved.
You can relax in the knowledge that our lubricants are already being used by many manufacturers of taps
and valves. WRc (Water Research Council) approved.
All water valves, single lever mixers, double taps for hot and cold water, 'O' rings and ceramic
cartridges must use lubricants that are physiologically recognised as being efficient,
safe, odourless and tasteless.
Lubricants lubricants are environmentally friendly and as they comply with USDA-H1, their
contact with foodstuffs is permissible. The WRc approval means that our grease and oil
lubricant can be used on any valve or tap application.
We know you can benefit from using any of the following special lubricants on taps, valves
and other water contact fittings.
Lubricants No111GL320 which is a fully synthetic grease and has WRc approval. This grease has
a temperature range of -50°C to +130°C and is resistant to steam and disinfectants.
Lubricants No111K 6000 which is a highly viscous silicon oil approved by WRc for the
lubrication of cold and hot water fittings. It has excellent adhesive properties and a
service temperature range of -50°C to +250°C. WRc Approved product.
We have many other greases and oils and we know we can provide the correct lubricant
for your water taps, valves and fittings from the extensive Lubricants range.
To discover more, you can either fill in the tell us what you want form
or just send us an e-mail by clicking here.
We look forward to speaking with you.
[home] [about you]
[about us] [oem club]
[link to us] [tell us what you want]
[operating conditions] [approvals]
[oil safe] [magnom oil filtration system]
[heating oil] [grease guns]
[medical white oils] [links] [contact us]
[Publishing] [Site Map]